Skip to main content

Ubuntu 30-Mount Check Annoyance

If you’ve used Ubuntu Linux for longer than a month, you’ve no doubt realized that every 30 times you boot up you are forced to run a filesystem check. This filesystem check is necessary in order to keep your filesystem healthy. Some people advise turning the check off completely, but that is generally not a recommended solution. Another solution is to increase the number of maximum mounts from 30 to some larger number like 100. That way it’s about 3 times less annoying. But this solution is also not recommended. Enter AutoFsck.

AutoFsck is a set of scripts that replaces the file system check script that comes shipped with Ubuntu. The difference is that AutoFsck doesn’t ruin your day if you are so unfortunate to encounter the 30th mount. The most important difference is that AutoFsck does its dirty work when you shut your computer down, not during boot when you need your computer the most!

The 30th time you mount your filesystem, AutoFsck will wait until you shut down your computer. It will then ask you if it is convenient for you to check your filesystem. If it is convenient for you, then AutoFsck will restart your computer, automatically execute the filesystem check, and then immediately power down your system. If it is not convenient for you to check your filesystem at that moment, then AutoFsck will wait until the next time you shut down your computer to ask you again. Being prompted for a file system check during shutdown is infinitely more convenient than being forced to sit through a 15 minute check during boot up.

So, here’s how you get going with AutoFsck.

  • First, you need to download the package. It is available on the project page, but here is a direct link.
  • Extract the contents of the archive to anywhere that’s convenient for you.
  • Inside that folder, run the script called ‘install’.
  • Follow the on-screen instructions.
  • AutoFsck will start working immediately.

I haven’t done much reading about whether or not this script will be included in the next release of Ubuntu, but I definitely think it should be. AutoFsck finally makes Ubuntu the ultimate distribution of Linux.

– EDIT–

As many visitors have suggested, Bonager is also a good solution for this issue. Bonager sits in your system tray and lets you easily see how many boots you have left until a scan is required. It will warn you if a scan is about to happen, and it also lets you force a scan early if you want to get it out of the way. This solution does not check the filesystem on shutdown like AutoFsck does, so if you’re not paying attention or you forget that a check is coming, you might still be surprised.


More Topics:

Comments

Popular posts from this blog

How to install Skype on Ubuntu 10.04 Lucid Lynx

UPDATE: Skype has now been uploaded to the "partner" official Ubuntu 10.04 Lucid Lynx repository. See Install Skype in Ubuntu 10.04 Lucid Lynx from official partner repository Command Line way Get the package: For 32-bit $ wget http://www.skype.com/go/getskype-linux-beta-ubuntu-32 For 64-bit $ wget http://www.skype.com/go/getskype-linux-beta-ubuntu-64 You will need to install the following libraries. $ sudo apt-get install libqt4-dbus libqt4-network libqt4-xml libasound2 Now install skype(the file u just downloaded, may be named intrepid-ibex) $ sudo dpkg -i skype-XXXXXXXXXXXX.deb If you still get some dependency error then just type the command below $ sudo apt-get -f install this will install the dependencies and the skype. Non - Terminal Download the setup 32 -bit 64 -bit You will these packages: libqt4-dbus libqt4-network libqt4-xml . Goto Synaptic manager and install them. Now Launch the Skype install .deb file (just double click it) and follow the on screen prompts.

gtalx: Howto Gtalk in ubuntu ( google talk )

Did you fail to use " gtalk in ubuntu " ... Now you can chat and talk to your gmail buddies in ubuntu... 1. check for gtk2.0 and qt4 $ sudo apt-get install libgtk2.0-dev $ sudo apt-get install libqt4-dev libogg-dev libtheora-dev $ sudo apt-get install libsdl-dev libavcodec-dev libswscale-dev $ sudo apt-get install libexpat-dev libraw1394-dev libvorbis-dev $ sudo apt-get install libgsm1-dev  libspeexdsp-dev libmediastreamer0-dev libortp-dev 2. Remove 'pulse audio sound server' Open synaptic package manager and remove pulse audio 3. "Download gtalx" from here Dowload it here 4. Extract the file.... $ tar -zxvf 0.0.4.tar.gz 5. Get into the directory.... $ cd 0.0.4 and then... $ sudo chmod u+x make $ ./make $ sudo ./make install 6. Enjoy..... Please comment about your installation(whether it was a success or not....) Take gtalx from Applications > Internet > gtalx Enter your gmail login information..and click connect...

Howto Install BSNL wll clarity phone in Ubuntu

Hello linixians, Failed to access internet through your bsnl clarity phone.... Here is an easy way 1. Just download this executable..... bsnlclarity and save it to your home folder. 2. Connect your phone to the system with the usb cable. 3. Now at terminal type $ sudo ./bsnlclarity You will be asked for your username and password for accessing the internet enter it ..... now start surffing Ctrl+C to stop