Skip to main content

How to install Skype on Ubuntu 9.10 Karmic Koala

The two methods  below doesn't work now. Please see http://blog.dipinkrishna.info/2009/11/how-to-download-and-install-skype-for_3060.html for a successfull installation of skype on ubuntu.

I have provided two methods. Please do comment which one is successful.

Follow these steps to install skype in ubuntu 9.10 (64 bit).
        First add:
            deb http://packages.medibuntu.org/ karmic free non-free
        to your source.list
Now open a terminal and type:
$ sudo wget http://www.medibuntu.org/sources.list.d/hardy.list -O /etc/apt/sources.list.d/medibuntu.list
Then do an update:
$ sudo apt-get update
$ sudo apt-get --yes -q --allow-unauthenticated install medibuntu-keyring
$ sudo apt-get -q update
And finally install Skype.
$ sudo apt-get install skype
Ready ... now start skype with
$ skype

OR


Download the setup
32 -bit
64 -bit


Launch the Skype install .deb file (just double click it) and follow the on screen prompts.

(To start Skype  at system startup)
Go to "System -> Preferences -> Startup Application", Click "Add" and enter the following details:
  • Name: Skype
  • Command: skype
Click "Save"
Next time you start your system Skype will auto-launch.

Enjoy using Skype in ubuntu.

Comments

Anonymous said…
Method 2 worked for me first time for installation. Thank you. I cannot seem to get Skype to run at startup though, but that's probably down to me.
Unknown said…
second procedure worked for me. the one downloading .deb package but not the commands in the terminal.
Thanks.
patarisonha said…
second for me too... but i haven't tried the first one. thank you
Ramophethe said…
I used the 1st method just because I wanted it a lil bit harder and it worked fine with me!
Anonymous said…
both of methods did not work for me.
in both case system write me a message that I don't have some packets:
The following packages have unmet dependencies:
skype:
Depends: ia32-libs (>= 1.6) but it is not going to be installed

Depends: lib32asound2 (> 1.0.14) but it is not going to be installed

Depends: lib32gcc1 (>= 1:4.1.1-21+ia32.libs.1.19) but it is not going to be installed

Depends: lib32nss-mdns but it is not going to be installed
Depends: lib32stdc++6 (>= 4.1.1-21) but it is not going to be installed

Depends: libc6-i386 (>= 2.3.2) but it is not going to be installed

E: Broken packages
Ramon said…
I installed Skype on Karmic, but it does not seem to detect any microphones. It detected my webcam and that is the microphone I use. Can anybody help please?
Dipin Krishna said…
Try installing the skype version 2.0 and and select "HD Intel (hw:0)" option in skype's autio properties.

If you have already installed Skype 2.1 from Medibuntu Repos, you will have to uninstall skype-common via synaptic, as well as skype, or else the Skype 2.0 package will not install via GDebi.

Get the verion 2.0 from here http://download.skype.com/linux/skype-debian_2.0.0.72-1_i386.deb
Unknown said…
Nothing worked here. The first method broke when I tried

#sudo apt-get --yes -q --allow-unauthenticated install medibuntu-keyring

and the second says, after the launch, wrong architeture 'i386'.

Any one can help me?
Unknown said…
BUT I need to install medibuntu first, by
# sudo nano /etc/apt/sources.list
and add the line
deb http://packages.medibuntu.org/ karmic free non-free
to that archive, ant then update and install skype.
Unknown said…
Method 2 worked softly for me.
Thanks a lot!
Zabbaskeema said…
#1 Worked like a charm, BUT:

First add: deb http://packages.medibuntu.org/ karmic free non-free to your source.list

FYI I am on Kubuntu 9.10, x64 flavor.

Cheers!
Unknown said…
Comigo a instalaĆ§Ć£o funcionou perfeitamente, porĆ©m o Ć”udio com o pulseaudio nĆ£o funcionou. A mensagem de erro Ć©... "RtApiAlsa: underrun detected"

-------
reinaldovale@gmail.com
Fortaleza - Brasil
Unknown said…
A instalaĆ§Ć£o funcionou perfeitamente, porĆ©m o Ć”udio com pulseaudio nĆ£o funcionou. A mensagem de erro Ć©... "RtApiAlsa: underrun detected"

-------------
reinaldovale@gmail.com
Fortaleza - CE - Brasil
Unknown said…
The first method worked for me
Deivis Poskus said…
First procedure worked for me. 9.10 x32
Unknown said…
Hi , the 2nd works fine @ first shoot.

(I did not try the first.)
... even if we should work "Microsoft-different" and double click is always the same...

The easiest the better. x32.KK9.10
Thank you for your help.
Ć«RiC said…
2nd method is just what I tried in the first place: goto skype download latest package, doubleclick: Fehler: Falsche Systemarchitektur »i386«
Error: wrong system architechture »i386«

what does that mean?

And 1st method? I'm new to linux and ubuntu. But not afraid of code though. But what is my "source.list"?!?
Unknown said…
Thanks Guys,

I just tried second method, so far so good.

Keep up good work!!!!
saltydog said…
No more skype on medibuntu repositories as of today!
Cannae said…
Did the first one but sudo apt-get install skype failed to find skype.

Then used the second method with a Debian bouble click and it installed on my i386.

There was a missing dependency on second one until I did the first up to sudo apt-get install skype then the Debian double click worked perfect.

---Cannae
Unknown said…
im new to ubuntu and the second method was fast easy and worked just fine

thank you
Unknown said…
Method two worked the first time for me. I've been struggling with this issue for weeks.

Thanks!
Unknown said…
Eric (a few posts up) it means that you are running with an intel chipset as opposed to an AMD. That download is for AMD processors only. Download

http://download.skype.com/linux/skype-debian_2.0.0.72-1_i386.deb

Its for I386 Intel chipset, which is what you need.

Cheers,
Kyle
thanks for this... not a great help but it works... ahehehehe

Comment by: The Rookie Blogger
mikke said…
Thanks for your help Dipin.
First method doesn't work but the second is OK.

See you
Anonymous said…
Method two worked fine for me. I logged in and it worked fine.

Popular posts from this blog

How to install Skype on Ubuntu 10.04 Lucid Lynx

UPDATE: Skype has now been uploaded to the "partner" official Ubuntu 10.04 Lucid Lynx repository. See Install Skype in Ubuntu 10.04 Lucid Lynx from official partner repository Command Line way Get the package: For 32-bit $ wget http://www.skype.com/go/getskype-linux-beta-ubuntu-32 For 64-bit $ wget http://www.skype.com/go/getskype-linux-beta-ubuntu-64 You will need to install the following libraries. $ sudo apt-get install libqt4-dbus libqt4-network libqt4-xml libasound2 Now install skype(the file u just downloaded, may be named intrepid-ibex) $ sudo dpkg -i skype-XXXXXXXXXXXX.deb If you still get some dependency error then just type the command below $ sudo apt-get -f install this will install the dependencies and the skype. Non - Terminal Download the setup 32 -bit 64 -bit You will these packages: libqt4-dbus libqt4-network libqt4-xml . Goto Synaptic manager and install them. Now Launch the Skype install .deb file (just double click it) and follow the on screen prompts.

Howto Install BSNL wll clarity phone in Ubuntu

Hello linixians, Failed to access internet through your bsnl clarity phone.... Here is an easy way 1. Just download this executable..... bsnlclarity and save it to your home folder. 2. Connect your phone to the system with the usb cable. 3. Now at terminal type $ sudo ./bsnlclarity You will be asked for your username and password for accessing the internet enter it ..... now start surffing Ctrl+C to stop

gtalx: Howto Gtalk in ubuntu ( google talk )

Did you fail to use " gtalk in ubuntu " ... Now you can chat and talk to your gmail buddies in ubuntu... 1. check for gtk2.0 and qt4 $ sudo apt-get install libgtk2.0-dev $ sudo apt-get install libqt4-dev libogg-dev libtheora-dev $ sudo apt-get install libsdl-dev libavcodec-dev libswscale-dev $ sudo apt-get install libexpat-dev libraw1394-dev libvorbis-dev $ sudo apt-get install libgsm1-dev  libspeexdsp-dev libmediastreamer0-dev libortp-dev 2. Remove 'pulse audio sound server' Open synaptic package manager and remove pulse audio 3. "Download gtalx" from here Dowload it here 4. Extract the file.... $ tar -zxvf 0.0.4.tar.gz 5. Get into the directory.... $ cd 0.0.4 and then... $ sudo chmod u+x make $ ./make $ sudo ./make install 6. Enjoy..... Please comment about your installation(whether it was a success or not....) Take gtalx from Applications > Internet > gtalx Enter your gmail login information..and click connect...